Top 7 Best Oil for 5.7 Hemi Reviews & Buying Guide in 2023

5.7 Hemi requires a particular type of engine oil to boost maximum smoothness, heat and wear protection, a longer drain interval, and fuel efficiency, and enhanced performance. 5.7 Hemi is an engine produced by Chrysler that has application in the RAM 1500, 2500, and 3500 pickup models

In the article below, I have outlined some of the best oils for 5.7 Hemi engines that are considered to offer you supreme features and performance.

What Oil is Recommended for 5.7 Hemi Dodge RAM by Manufacturer?

The recommended engine oil for 5.7 Hemi is MOPAR manufactured 5W-20 oil. Mopar oil for engines is a hugely recommended engine lubricant for 5.7 Hemi. Mopar oil will always be the recommendation of the manufacturers for all the cars manufactured by Chrysler Automobiles. Mopar is also the best oil for the 5.7 Hemi Charger. Check Price here.

Our Recommended 7 Best Oil for 5.7 Hemi in 2023

#1. Castrol 03057 GTX MAGNATEC 5W-30 Synthetic Motor Oil-best oil for high mileage 5.7 hemi

Check Price on Amazon

Decrease the engine wear exclusively with the Castrol 03057 GTX MAGNATEC 5W-30 Full Synthetic Motor Oil. This oil comes with intelligent molecular technology that significantly reduces the amount of oil drain from your engine’s crucial parts. And the result? 6 times the wear resistance of your engine, thus increasing the longevity.

When an engine stops or becomes idle, oil that was circulating inside the engine parts also stops and starts to drain. So, when an engine warms up, the oil starts to circulate again that takes significant time. In between that period, engine parts start to wear as much as 75%, however, this oil’s smart compound remains stick to the parts and creates a protective layer to ensure wear resistance.

Main Features and Benefits to Use:


This oil meets the API SP standard as well as other standards, such as API SN PLUS and API SN. This means it will provide you with excellent protection against LSPI (Low-Speed Pre-Ignition) as well as Timing Chain. Because of this, you will have a longer-lasting engine.


This oil also maintains the ILSAC GF-6, thus ensuring you with high resistance against LSPI.

GM dexos1® Gen 2

To give you the maximum level of fuel efficiency, this oil also has a GM dexos1® Gen 2 rating. This oil will increase the fuel economy of your engine. Your mileage cover will be very optimal after using this oil.

Full Synthetic & Sludge Protection

The compounds of this oil are fully synthetic which means you will experience much less oil sludge (1.4X better sludge protection) as well as deposits. This also gives you the ultimate cleaning power as it keeps the clean engine.

Low Viscosity & Faster Startup

Its synthetic ingredients offer very low viscosity which ensures maximum fuel efficiency. This 5W-30 full synthetic oil will give you excellent flow, ensuring low-temperature protection and fast start-up in cold weather. Due to faster startup and enhanced friction durability which assures smooth shifting of gear, this oil is the preferred choice of racing cars.

4X Smooth & Extended Drain Interval

Also, the industry Sequence IVA wear test says this will give you 4 times smoother engine part movement. This oil fights friction and prevents future oil leaks, hence offers you extended drain intervals of as much as 15000 miles.

Oxidation Resistant

This oil has the ability to improve the oxidation resistance of your engine. Its antioxidants prevent oil breakdown and enhance the life of your engine while operating in higher temperatures.

Heat Protection

Moreover, this oil has excellent engine heat protection. If your engine heats up too frequently, this oil will cool down the engine very fast.


IngredientsFull Synthetic
GM Dexos 1 Gen 2Meets
Ford WSS-M2C945-B1Meets
Liquid Volume160 Fluid Ounces


  • Provides excellent wear resistance to the engine compared to other oils. This prevents the engine to have a short lifespan and helps the engine to perform to a greater extent.
  • Has low viscosity which increases the fuel efficiency of the engine to a certain extent.
  • Combats LSPI and provides greater protection against timing chain. LSPI is a common occurrence with turbo engines and this decreases the possibility.
  • 4X smoother movement is assured with this oil. A smoother movement will create very few frictions between the parts and give a heightened performance.
  • Made from intelligent compounds which remain stuck to the engine parts. This way they create a protective layer within the parts so that when the engine starts, minimum wear is ensured.
  • Offers an extended period of oil drain interval. Unlike most other engine oils, you need to change the engine oil way less frequently.


  • This is not available in all viscosity levels, rather only limited to 0W-20, 5W-20, 5W-30, and 10W-30. So if you are looking for something out of this range, you won’t be able to get one

#2. Valvoline Advanced Full Synthetic SAE 5W-30 Motor Oil

Check Price on Amazon

Made to give your tough cars a sense of state-of-the-art protection, the Valvoline Advanced Full Synthetic SAE 5W-30 Motor Oil is an excellent choice. Best for the trucks & SUVs which need the extra layer of defense, this oil provides that flawlessly. Technology and innovation; this is a combination of both worlds.

Its innovative additives, which just don’t want to wear off will an enhanced level of the shield. Besides, the heat won’t do much damage, as its guard against the high temperature is phenomenal. Moreover, this oil also performs excellently to fight against oil sludge and antioxidants.

Main Features and Benefits to Use:


This oil comes with specifications that meet the standard of API SP. This means your engine will perform great against LSPI or Low-Speed Pre-Ignition. This is a common problem with turbo engines, which can be minimized by using this oil.

Another additional feature of this standard is the protection against the timing chain. Timing chains are coming back to business after being hindered by the timing belt. However, they are still comparatively harmful to the engine which is lessened by this oil.

Superior Antioxidants & Heat Protection

Engines are all about their power. However, high power comes with increased heat and this is not a good friend to your engine. But have no worries as this oil with giving you 10 times more heat protection, prolonging the life of your engine. Its excellent anti-oxidative properties will keep your engine safe from oil breakdown even when temperatures are extremely high.

Full Synthetic

Synthetic oils are high on demand and sure is this one. Due to its full synthetic compounds, you will experience much fewer oil clusters as well as sludge. In fact, this oil claims to offer a 25% better deposit. Keeping your engine clean will be much easier with this engine oil.


This oil has excellent capabilities, as it maintains the standards of ILSAC GF-5. You will experience remarkable fuel efficiency, upgraded strength as well as sludge protection. To keep your engine in better health, this is the oil you need.

Less Viscosity

This oil comes with a viscosity level of 5W-20, which is very low. This low level of viscosity will provide you smoother engine part movement and very little friction. Friction brings detrimental effects on the health of the engine and therefore, minimizing the effect is very important.


IngredientsFull Synthetic
Heat Protection10x
Sludge Reduction25%
Liquid Volume160 Fluid Ounces


  • Excellent choice for your heavier utility vehicles. If you’re a person who mostly works with trucks or SUVs, this is going to be an excellent choice. Besides, this also performs great with other equipment such as snow-blower.
  • As it features superior antioxidants, it offers smoother startups. Even in very low temperatures, you will barely be in a problem with the startup of your engine.
  • This has a longer draining life, which will ensure you cost efficiency. As a result, you won’t have to change your oil as often.
  • Its additive compounds make the engine more sensitive thus more responsive. The startup won’t be an issue while using this engine oil.
  • The container is very convenient to use. It’s easy to grip, carry and has a bright color, which makes it quite visible, even in low light.


  • It comes with a comparatively higher price. Although the price of this oil is high, you are getting better benefits from it. In this sense, it is justifiable to charge such a high price.

#3. Pennzoil Ultra Platinum Full Synthetic 0W-40 Motor Oil

Check Price on Amazon

From the first makers of motor oil from not crude but natural gas, the Pennzoil has brought their Ultra Platinum Full Synthetic 0W-40 Motor oil. This oil comes with a PurePlus™ Technology which can’t be seen in any other oil in this criteria.

While using this excellent oil, you will be filled with tons of benefits. This oil keeps your engine clean whereas gives advanced protection against wear. Besides, this carbon-neutral oil will give you the ultimate performance force while keeping the environment cleaner.

Main Features and Benefits to Use

PurePlus Technology

Its PurePlus Technology has two distinct benefits. Decrease in the performance-robbing deposit in one; keeping the engine parts lubricated is the other. Low deposited means your engine won’t be dragged down which means higher performance output. Lubricated engine parts will give you lesser friction and smoother piston movement.

Cleaner Engine

This oil has a very low viscosity, 0w-40 to be exact. Because of such a low viscosity level, the oil remains thin in lower temperatures which makes it less prone to build up sludge. No sludge means a cleaner engine and a cleaner engine means betters startup.

Oil Solidity and Durability

Even in extreme heat conditions, this oil will remain indestructible to break down. Its viscosity will not be lost and the thermal breakdown will not happen. You’ll be reliable with the strength as well as durability of this engine oil. 


This oil is very economical when it comes to fuel consumption. As this oil is very good at resisting heat, less fuel energy is needed to perform. Not just that, as this keeps the engine safe from a lower temperature, startups will take less time on your vehicle, thus giving your engine less pressure to roll.

Natural Gas

Most of the engine oils are made from crude oil, which makes them different from this oil. This oil is 100% made from natural oil which is very clean. This cleaner oil will also keep your engine fresh as well as the environment. Speaking of nature, this is also carbon neutral.


IngredientsFull Synthetic – Natural Gas
Lowest Operating Temperature-40ºF
Highest Operating Temperature+400ºF
Carbon EmissionNeutral
Average Miles Driven/Year15,366 Miles
Liquid Volume32 Fluid Ounces


  • This offers much better fuel efficiency which will help you to go that extra mile. Even Pennzoil claims it will go as much as 550 extra miles compared to others.
  • PurePlus Technology gives your engine the ability to perform without the worry of deposit.
  • Lubricates the engine parts which will help you to have a faster startup, smoother performance, and very less internal parts friction. Your engine will last much longer while performing way better.
  • It offers excellent heat protection, both in cold and hot temperatures. Even at as high as +400ºF and as low as 40ºF, this will give you the ultimate performance.
  • This oil gives you the reliability to perform accordingly in any worst-case scenario. Its endurance, as well as stability, will always keep you problem-free.


  • This oil is quite pricey. Also, the less availability of this oil makes it hard to find. It would be much better for you to buy in a bunch to avoid inconvenience.

#4. Mobil 1 Advanced Full Synthetic Motor Oil 5W-20

Check Price on Amazon

If you’re looking for an oil that will keep your engine safe and sound up to 10000 miles, Mobil 1 Advanced Full Synthetic Motor Oil is what you need. Keeping excellent viscosity and preventing the oil breakdown by having better control with oxidation, this oil is a champ. Performance and protection, this offers both.

Industry toughest standard, yes this oil is made in such a way where it can meet up to that level. Besides, it balances its compounds of synthetic as well as additives perfectly so that it can give the ultimate performance.

Main Features and Benefits to Use

All-round Performance of the Engine

The blend of this oil consists of synthetic-based stocks and an additive component system. The blend is done in such a way that even the toughest condition won’t affect the performance of the engine, thus it can be used in any type of car.

Enhanced Protection

As much as 10,000 miles, this oil will serve you the best of the best experience. In between those miles, you will have a protected engine that is running like a new one.


To keep your engine safe from LSPI, this is made in a way that it can meet the ILSAC GF-6 standards. Your engine will remain clean while keeping the fuel consumption low; additional convenience is provided.


IngredientsFull Synthetic
Oil Change InternalUp to 10,000 Miles
ILSAC GF-5\6Meets
Lowest Operating Temperature-30ºF
Highest Operating Temperature+500ºF
Vehicle Service TypeCar, Truck
Liquid Volume160 Fluid Ounces


  • Excellent fuel economy will keep your cost and frequent oil change needs low. You don’t need to think of changing the oil up to a range of 10,000 miles; a piece to the mind.
  • This oil offers a cleaner engine which means you will notice much less presence of sludge as well as oil deposit.
  • Even if very low temperature, as low as -30ºF, your engine will start very easily.
  • Rich in quality and unrivaled in durability, this oil will give you enhanced reliability.


  • Even though this oil performance excellently, it is not a good option for both diesel as well as gasoline.

#5. Royal Purple 51520 High-Performance Motor Oil 5W-20

Check Price on Amazon

A specially designed oil that can help you to restore your engine performance, that so it much higher mileage, the Royal Purple 11748 HMX High Mileage Synthetic Oil is a great option. Containing zinc and phosphorus, this oil is excellent at wear resistance. Besides, its high-grade base oil along with its additive compounds will bring the best out of your engine.

With synthetic additive technology, this oil will surpass any other lubricant, even premium ones. It will keep your engine cool, hence providing optimization of the performance. Besides, engine wear will be very minimal as internal part frictions are very less.

Main Features and Benefits to Use

Synthetic Additive Technology

This technology provides excellent lubrication, even better than some of the best options on the market today. This lubricant keeps the engine smooth and free of friction.

Wear Resistance

As mentioned before, friction is very less with this oil. This means your engine will experience much less wear and have a longer life.

Low Viscosity

The viscosity of this oil is very low, which means less presence of sludge will be noticed. Therefore, your engine will be clean and better performing. 


GM Dexos 1Meets
Liquid Volume160 Fluid Ounces


  • The versatility of this oil due to its compatibility with other mineral and synthetic oils sets it apart from most other oils on the market today.
  • Provides superior protection while improving performance for your diesel or gasoline engine.
  • Offer stability of oxidation, which will give you an extended period of oil drain.
  • An increase in horsepower, as well as torque, will be noticed when you are going to use this oil.


  • Not idea for rather expensive high-performance cars as this oil is made to work on daily use cars.

#6. AmazonBasics Full Synthetic Motor Oil

Check Price on Amazon

Manufactured by Warren Distribution Incorporated, the AmazonBasics Full Synthetic Motor Oil is a good oil for your engine. This Dexos 1 approved oil has a drain range of up to 10,000 miles. Besides its high-quality blend is meant to give you that extra edge on performance.

This oil is well acclaimed for its high level of performance. However, most importantly, this oil comes at such a low price compared to other competitors that, it cuts the cost of maintenance significantly. No matter whether your engine is surviving through longer mileage or higher pressure, this engine oil will keep it protected.

Main Features and Benefits to Use


This oil has an improved ability to provide deposit protection for pistons, even in much higher temperatures. This will keep the engine cleaner and performance smoother. Besides, its SN Plus rating shows this is the oil which is considered to be the highest rated in all over America.

Fuel Economy

The efficiency of fuel is very high with this oil due to its less prone to breaking down. Low breakdown enhances the oil draining period, thus keeping the cost low.

Friction Protection

This oil offers excellent lubrication to the parts of the engine. This way, the parts will experience less friction, which will keep the engine wear low. 


Viscosity Tested bySAE – Society of Auto Engineering
ILSAC GF-4/5Meets
GM Dexos 1Meets
Liquid Volume160 Fluid Ounces


  • Provides enhanced protection in any extreme weather conditions. If you are unfortunate enough to fall into any of the worst-case scenarios, this oil won’t fail you.
  • Offers fuel economy due to higher drain interval as well as wear protection.
  • Lubricates very well which allows the engine parts to move very easily and smoothly.


  • Comes in a smaller bottle which turns out to be very inconvenient.
  • Also, the bottle lacks a visibility strap with which the level of remaining liquid can be seen.

If you’ve read all of the reviews above, here is a quick recap of all the differences between the oils so that you can understand which one is the most suitable for your precious engine.

Best Recommended Oil For Dodge Ram 5.7 Hemi:Mopar Engine Oil, 5W-20 Graded

The Hemi 5.7 is not a special case either. If your car is the one with low mileage, then we will certainly recommend you to use Mopar engine oil. Manufacturers recommended lubricators for the 5.7 Hemi Challenger engine. Although you will face lesser adjustment periods for Mopar oil than other up-to-date fabricated oil for the engine, you will yet have the necessary engine safeguarding and competence. Finally, if your car has a guarantee, then it will always be better to utilize this engine oil which Chrysler asks you to apply.


  • Society of Automotive Engineers Standard: 5W-20
  • American Petroleum Institute Oil Category: SN


  • 5W-20 standard grade
  • Ensures effortless running engine
  • Provides a manufacturing warranty as well.

Best oil for 5.7 Hemi Challenger

MOPAR manufactured 5W-20 oil which is equivalent to Pennzoil oil is the recommended engine oil for 5.7 Hemi Challenger

Check Price on Amazon

Benefits of choosing the right oil for 5.7 Hemi engine

Let’s start with the benefits. The following are the main factors to convince you to buy the right oil for your 5.7 Hemi engine. Don’t just go and buy whatever you see in the market.

Low viscosity ensures maximum fuel efficiency

Low viscosity generally indicates the lower value of the first X of the formula “-XW-XX”. If the viscosity of the oil is low, it will benefit you by a great margin. You will see that you are getting maximum fuel efficiency.

Enhanced friction durability assures smooth shifting of gear

A good oil will enhance the friction durability too, to make sure that you have a great experience with the engine. If the friction durability is good, you will experience smoother gear shifting.

Protects against copper corrosion and rusting

Having problems with corrosion and rusting? Don’t worry. Good engine oil can solve the problem immediately. If you face the mentioned problems, try using good engine oil to protect the engine parts from corrosion and rusting.

Improved oxidation resistance prevents deposits and sludge buildup

Choosing the right oil for the engine will also give you improved oxidation resistance. Well, what is the plus of this “improved oxidation resistance”? If the oxidation resistance gets better, it will prevent the deposits and sludge buildup within the engine.

Excellent internal engine heat protection

Another amazing benefit you will get by choosing the right oil for your engine is, the internal engine heat protection will be great. Thus, you won’t need to worry about heat protection anymore. It will be up to its mark all the time.

Low temperature protection

The suitable engine oil will also ensure low temperature protection. If you can ensure this feature, in cold weather or other similar circumstances, you can sleep in peace. Because the engine oil will provide you the protection you need in that situation.

Extended drain interval reduces engine deposits

Another way you can prevent or reduce engine deposits is to extend the drain interval. You can do so by using the proper oil for your vehicle’s engine. The extended drain interval will make sure that the engine deposits get reduced.

Fast start-up in cold weather

You will be amazed to see that the start-up is quick even in the cold weather. You can achieve this feat by just using the suitable oil for your vehicle’s engine.

Cools down the engine

The right oil for the engine will also make sure that the engine gets cooled down within a very short period of time. In this way, your vehicle and engine will remain tip-top.

Increases fuel economy

If you use the right brand of oil for your vehicle’s engine, the fuel economy will be great. Because there will be less waste of fuel in the process.

Fights friction and prevents future oil leaks

The proper oil for the engine fights friction very strongly. If there is less friction among the engine parts, there will be definitely less damage and holes within them. In this way, there will be fewer fuel leaks at the same time.

Antioxidants prevent oil breakdown

Last but not the least, antioxidants in the engine oil will make sure that there is no oil breakdown within the engine. Isn’t that great?

Buying Guide of 5.7 oil for Hemi in 2022

Now you know the main benefits of buying the right oil for the engine. But before hopping into buying the oil, you have to consider the following factors to ensure that you are buying the right one.

Oil type

The first thing you need to consider before buying the oil is whether the oil is conventional or synthetic. For your information, Hemi engines don’t use conventional oil. So, there is no need to buy conventional oil for the 5.7 Hemi engine.


Knowing the viscosity of the oil is very important because you must know the thickness level of the oil along with the temperature compatibility. Usually. SAE 5W-20 works best in almost every temperature condition. But if you have RAM 2500 or 3500, you have to consider SAE 5W-30. This information is always available in the manual.

Car specs

Another important factor you need to consider is to observe the car specs carefully. Not every vehicle is designed the same. Almost every vehicle has something unique among them. That is why you need to assure that the oil you are going to buy is compatible with your vehicle specifications.


To ensure the oil’s compatibility, you must not forget to see the labels before buying. Seems a minor thing, right? That is why it has the most chance of being forgotten. So, don’t miss out on reading the label.


Yes, additives are good for your vehicles’ engine. But too many additives are not good by any means. That is why you must not forget to watch out for the additives too.

API standards

If the oil you are going to buy is API-certified, it is always a plus. An API-certified oil will make sure that the engine’s system stays protected from things like pre-ignition while the vehicle is on low speed.

About 5.7 v8 hemi engine with specification chart

It is time you get some basic ideas about the engine for which you are going to buy the oil. 5.7 Hemi was the first ‘third-generation’ engine from Hemi. It had some huge changes in it compared to the second-generation engines. 5.7 Hemi had 2 spark plugs instead of one in order to improve the combustion process and reduce emissions.

5.7 also has the MDS (Multi-Displacement-System) to ensure great fuel economy. Even though this engine has one big disadvantage- it can’t go to the peak torque at low speeds, this engine is still a great one to have. You can see the main specifications from the chart below-

EngineChrysler 5.7L Hemi (V-8)
Engine Block MaterialCast iron
Cylinder Head MaterialCast aluminium alloy
Ignition2 spark plugs for each cylinder, coil-near-plug
Bore99.49 mm (3.917 inches)
Stroke90.88 mm (3.578 inches)
Firing Order1-8-4-3-6-5-7-2
ValvetrainHydraulic roller lifters, 2 valves for each cylinder
Fuel TypeGasoline
Oil capacity7 quarts w/filter change
HorsepowerUp to 395 hp at 5600 rpm
TorqueUP to 410 lb-ft at 3950 rpm
Max. Speed5800 rpm
Weight500 lbs (226.796 kg)
PlantsSaltiloo Engine Plant, Mexico

5.7 V8 Hemi oil type and capacity

Let’s start with the oil type 5.7 Hemi engines use. The manufacturers recommend using synthetic oil and 5W-20 for the Hemi engine. That is why it is not ideal to use conventional oil and 5W-30 for the Hemi engine. Make sure to buy synthetic oil and 5W-20 type oil for your Hemi engine.

The oil capacity of the 5.7 Hemi is 7 quarts that are equal to 6.62 liters if you are not acquainted with ‘quart’.

Specs5.7 Hemi
Max revs5800 rpm
Coolant16.2 quarts (15.33 liters)
Compression10.5: 1 (for 2009+ model years)
Oil capacity7 quarts (6.62 liters)

5.7 Hemi uses conventional or synthetic oil?

The manufacturers of the 5.7 Hemi engine recommend using synthetic oil for the engine. When the manufacturers are recommending you using synthetic oil, there is no need to go for any conventional oil. One of the key reasons is it has great oil life compared to other conventional oil.

If you see the viscosity level, it is perfect for the engine. And synthetic oil will also give you extra sludge protection in the worst conditions. So, why not use synthetic oil? However, the manufacturers recommended using synthetic oil. They did not make it mandatory. If you want to use conventional oil for the engine, you are on your own.

Read More on:5.7 Hemi Cylinder Deactivation Solenoid Location

5.7 Hemi Oil Type by Year

5.7 Hemi was the first third-gen engine. It got its introduction back in 2003. That means it is almost twenty years old. And an engine that old must go through some major updates and changes throughout the years. It may affect the oil type or other factors related to oil too. Let’s discuss the changes that happened in the 5.7 Hemi engine at different stages of time.

2003-2008 Hemi 5.7 Oil Type

During this time, the engine was basically the same as the first version. This version of the engine took 7 quarts of oil with the oil filter. The oil type the engine used was 5W-20. The compression ratio for the engine was 9.6:1.

2009-2012 Hemi 5.7 Oil Type

The 5.7 Hemi got its major improvements in 2009. The compression ratio changed. It was increased from 9.6:1 to 10.5:1. That means you can get more horsepower and torque from the engine. Although the recommended oil type was still the same. You have to buy 5W-20 type oil if you want to follow the manufacturer’s recommendation for these model years.

2013-Now Hemi 5.7 Oil Type

In 2013, for RAM 1500, the 5.7 Hemi engine got a little improvement. However, the oil type was still the same, 5W-20. But you have to use 5W-30 type engine oil in the RAM 2500/3500s that weigh more than 14,000 lbs.

How much does a RAM 1500/2500/3500 take?

Basically, all the 5.7 Hemi have an oil capacity of 7 quarts. That applies to every RAM 1500/2500/3500. Usually, you will get the engine oil in a capacity of 5 quarts. If you want to fill the oil capacity to its maximum, you have to buy extra two cans to do so.

Dodge ram 1500 5.7 hemi engine oil capacity

The Dodge Ram 1500 will take 7 quarts of engine oil in maximum. Because it uses 5.7 Hemi as its engine. You can say all the Hemi 5.7 have a maximum oil capacity of 7 quarts. But it is not recommended to overfill the engine with engine oil although you want the longest oil change interval.

2004 dodge Durango 5.7 hemi engine oil capacity

Same as the RAM 1500, Dodge Durango 2004 also has the maximum engine oil capacity of 7 quarts. The reason is the same. This vehicle also uses a 5.7 Hemi engine. Don’t forget to check for any potential engine leaks after every oil change.

Jeep and Cherokee 5.7 hemi engine oil capacity

The engine oil capacity of Jeep and Cherokee is also 7 quarts with the oil filter. Because like the RAM trucks, they also use a 5.7 Hemi engine. Try to use synthetic engine oil if you need to change the oil. And also try to stick with the 5W-20 type as the manufacturers recommend using it. If you can do these basic tasks, you will be great with your vehicle for a long time.

How to change the oil in 5.7 hemi?

Changing the oil is really a simple and straightforward process. But if you do not have any idea about this thing, we are here to help. After or before reading the steps we are going to mention here, you can also watch the video we are attaching here.

It will help you to understand the steps better and you will feel that you know what you are doing. Without any further ado, let’s head onto the steps-

1. Gather the necessary tools

The mandatory tools you are going to need to complete this process are-

  • A cardboard
  • A bucket or bowl
  • A socket (12mm)

2. Give the engine some time to cool down

You are going to change the oil, right? If the engine is too hot, we mean you just got off from the vehicle, the engine oil must be burning. In that time, if you choose to change the oil, you might get hurt. At least give an hour to the engine to cool down.

3. Do the cardboard

Now get the bucket or bowl ready. And put cardboard right under the front of the vehicle. You can escape from the possible mess from the spills in this way.

4. Go under the hood

After laying the cardboard under the ground, you are ready to go under the hood. Remember to take the socket and bucket with you.

5. Remove the drain bolt

It is time to remove the drain bolt. You will find it right behind the front end of the vehicle. We mean the front tire of course. Put the bucket under the drain bolt. Because the oil will be out as soon as you remove the bolt.

Now gently use the socket. The bolt should not be too tight. After the removal of the bolt, give some time for the oil to come out completely. You can wait for some dripping too. After that put the bolt back into its place. Do not over-tighten it.

6. Take off the oil filter & place the new one in its place

Now it is time for you to find the oil filter. Usually, the location of the oil filter is on the passenger side, above the front axle. Place the bucket under the oil filter too. Then remove the oil filter. You should be able to do this with bare hands. Just be careful here. If you do something wrong, everything will be messy.

Then install the new oil filter in the old one’s place. And you are done in this part.

7. Pour the engine oil

After removing the oil filter and drain bolt, you can now pour the new and fresh oil. Just do not forget the engine oil limit of the hemi engine. You are going to need more than one bottle as the oil limit is more than 5 quarts.

After pouring some amount from the second bottle, check the oil level with the dipstick. As soon as you are satisfied that you have poured enough oil, put the cap back on.

8. Start up the engine

You can’t simply pour oil into the oil filter. In order to do so, you have to start the engine. After the start-up, you will see that the oil level has gone down a bit.

9. Reset the indicator of oil

You have completed the manual part. Now it is time to let the engine know about the new oil. You have to reset the indicator in the dashboard to do so. Try to find the oil life setting. After you find the setting, you have to push the ‘play’ button on the steering wheel.

At this moment, you will find out that the engine is off. After a while, you will hear a beep sound. Do find the oil life setting once more and push the ‘play’ button to ensure the reset.

10. Check the oil level again

At this stage, you are probably all set to go. But do a little before that. Check the dipstick once again. If you see the oil level is at a satisfactory level, you are finally all set. If it is not and at the safe zone’s bottom, pour some more oil to reach safe mark’s top. Lots of steps, right? Yeah, it may seem that way. But only for the first time!

What is normal oil pressure for 5.7 hemi?

Well, the answer depends on the particular question you are asking. If you want us to let you know about the normal pressure when you are driving the vehicle, it is around 25-65 psi. And in cases of idle warm-ups, it lowers down to 44-46 psi. Your oil needs to be changed every 5,000-10,000 miles for a good thumb. A high quality engine oil is essential to run smoothly in these issues.

Due to the use of the wrong oil or the aging of your vehicle’s engine, you may fall into some oil pressure-related problems in 5.7 Hemi.

5.7 Hemi oil pressure at idle and oil pressure drops when idling

5.7 hemi oil pressure sensor location

If the oil pressure sensor becomes faulty, you need to get rid of this immediately to escape the codes. To remove it, you need to know the location first. You can find the sensor right next to the engine mount’s right side.

5.7 hemi oil filter number

5.7 Hemi oil filter takes Mobil 1M1- 113 extended performance oil filter. It is the best Dodge Ram 1500 pickup. On the other hand, this engine also prefers max pro 5W-20 oil and filter change kit OEM. The older models (before 2013) used the MO-899 filter.

And after 2013, they changed the filter and started using MO-399. However, both will serve you with the cause. But we feel that the larger the oil filter, the larger the capacity to hold craps.

5.7 hemi oil change interval

The maximum oil change interval recommended by the manufacturers is 10,000 miles. But you should not try to meet that figure to keep your vehicle and engine safe. If you use conventional oil, change the oil every 3000 to 5000 miles. And in cases of synthetic oil, do the change every 7500 miles. For synthetic oil, it would rise to 20-40%. And the timing was approximately 10,000-15,000 miles.

5.7 hemi oil control valve

Every vehicle does not have oil control valves. Generally, you will find them in vehicles that have variable valve timing systems within the engines. Here you can check full details of 5.7 Hemi Oil Control Valve Location.

5.7 hemi oil flow diagram

To understand the oil flow system of 5.7 Hemi, let’s have a look at a simple oil flow diagram. Even though the mentioned diagram is very old, you will get a basic idea with the diagram. Here’s a 5.7 Hemi oil flow diagram, pictures diagram, pictures do given below.

5.7 Hemi burning oil smell

If you smell burning oil from the 5.7 hemi, it indicates two things. First, the oil may be leaking. And second, there may be two surfaces rubbing together. You may also smell oil (not a burning smell) after an oil change. In the first two cases, stop driving your vehicle. Try to fix the issue as soon as possible. 5.7 Hemi is burning oil smell for two reasons. One is leaking or burning oil internally. Another is burning externally with worn piston rings and valve seats that allow the oil to sneak as if it burns fuel.

5.7 Hemi oil pan bolt size

There are four types of pen sizes available in the Hemi engine. These are different in sizes and features, such as ¼ inches, ⅜ inches, ½, and ¾ inches. These measurements are available in various shapes to fit in the different bolt heads. In short, six points for hexagon, eight points for double square, and 12 points for the double hexagon. Check 5.7 Hemi oil pan bolt size

You will get the oil pan bolts in packages. You can get the products from various online shops along with offline stores. The usual size of the bolt is 6.5×0.1×9.3 inches (length:height: width). And the package weighs around 0.87 pounds.

5.7 Hemi oil pump replacement Guide

People Also Asked

How much oil does 5.7 hemi take?

The maximum oil capacity of 5.7 Hemi is 7 quarts. That figure is equal to 6.62 liters. The engine can take this much oil with the filter. Even though the 5.7 hemi has gone through various changes throughout the years, the maximum oil capacity did not change. The Ram 1500 5.7 engine will require the use of A5W-20 full synthetic motor oil.

Can you use 5w30 in a 5.7 hemi?

Practically, Yes, you could use 5w-30 in a 5.7 Hemi engine. Because they are carefully identical, the Hemi engine does layout to in shape all sorts of pour ratings. In that case, Mobil 5W-30 is fine. It has a higher pour score than the thinner oils. A higher Mobil can run your engine too high.

So, you may use 5W-30 as opposed to 5W-20 because it will go with the drift like a 0w-10 or higher. It will not pay any damage to your engine. The manufacturers do not prevent you from using 5W-30 type oil. But they recommend you using 5W-20.

That doesn’t prevent you to use 5W-30. Hope that answers your question. However, you should not go beyond the manufacturer’s recommendations, except in extreme situations.

What oil is best for challenger?

As a car racer or a challenger, you keep deep faith in these five best oil for smooth driving. Before buying one, give prior oil that has a high capacity and quality.

It will keep your car engine soft while you’re roaming on the road. Okay. Let’s give you a list of some great oil for Dodge challenger. Hope it will help you if you are in a hurry.

  • Royal Purple 51520 API-Licensed SAE Synthetic Oil
  • AmazonBasics Full Synthetic Motor Oil
  • Liqui Moly 2259 Special Tec AA 5W020 Motor Oil
  • Pennzoil Platinum Synthetic Motor Oil
  • Driven racing Dl40 SAE 0W-40 oil with synthetic break-in.

Does dodge recommend synthetic oil?

Yes, Dodge recommends synthetic oil. But sometimes, you need to verify what kind of oil your engine supports. Because 1500 ram dodge recommended the only API-certified SAE of 5W-20 oil, before purchasing any oil, double-check these requirements on the package.

Many experts give Mopar, Pennzoil, and Shell Helix opinions as they fill the cap for the correct SAE grade. The manufacturers basically recommend using 5W-20 type oil to ensure the right viscosity.

As long as you are maintaining the viscosity, you do not need to worry about whether the oil is conventional or synthetic. But as synthetic oil is good for the engine, it is better to use.

Does dodge challenger require synthetic oil?

Dodge challengers have such a lot of up-to-date versions, as all of us know. But the current improved model of 2019 will advocate complete artificial oil. The 3.6 liter V6 bears the ability of 5.nine quarts and makes use of an SAE 5W-20.

Then, the subsequent model 5.7 L V8 additionally engaged with the ability of seven quarts of the identical proportion. The 6.2 liter V8 and the 6.4L V8 require 0W-forty and may maintain 7 quarts of oil at a time. The dodge challenger can run on conventional oil too.

That means it does not require synthetic oil compulsorily to run the engine. However, it will be a plus if you use synthetic oil as it gives the engine and oil a better lifetime.

How much HP can you add to a 5.7 hemi?

In order to add more horsepower to a 5.7 Hemi engine, you have to do a lot of customization. For a regular driver, the stock power is enough to satisfy the driver. But if you are an engine freak, you would not stop just there.

With almost all the customizations, you can reach up to 650 horsepower even though the engine won’t last long. You can increase the electricity of this pinnacle engine manually. Additionally, you could upload as much as 650 Horsepower to a 5.7 hemi.

Unless the greater you’ll give, the greater inner troubles you will face for this greater load. You can upload or purchase a tuner in the engine to deliver out the most electricity output out of your hemi. It additionally has an honest installation.

How many miles will a 5.7 hemi last?

The 5.7 Hemi has verified itself to be strong and greater dependable than others. The ram of this engine will construct in tough exertions and fleet your mind. If you have a good driving habit, you can easily cross the 250000 miles mark.

With a little bit of care, you can even go to the 300000 miles mark. It depends on the driving habit of a driver mostly. But if you want to get a rough idea, a 5.7 engine will last at least 200000 against all odds. Some stable Hemi engines will provide you with around 300K miles.

But any machine, but dependable they are, rely upon their maintenance. You want to perform the scheduled oil adjustments on time.

How many quarts of oil does a hemi 5.7 take?

The maximum oil capacity of 5.7 Hemi is 7 quarts. That means a 5.7 Hemi can take up to 7 quarts of oil. This figure is equal to 6.62 liters. However, you should not go for a total fill-up. 5.7 Hemi engine oil quarts endorsed on their viscosity weight.

Similarly, it relies upon the form of an engine. 2012 ram proprietors claimed that the 5.7 Hemi takes 7 quarts which include the filter, at the same time as 2006 evade Hemi takes the equal quarts. But the 1500 ram evades Hemi takes the identical quarts.

2013 evade ram advocated oil takes 3.6 to 4.7 liter within the same temperature. Dodge Ram 1500 engines will want 6 quarts at a time.

How do you get a 700 horsepower out of a 5.7 Hemi?

700 horsepower? Yes, you are close to the maximum figure. With pretty much every customization, you can get up to 650 horsepower though the engine won’t last long in that case.

You can get seven-hundred horsepower out of a 5.7 Hemi with a few clean steps. To get seven-hundred horsepower, you want to stroke and force the engine induction. You need to take the 6.1 or 6.4 engine as a base.

Then take a 08 charger with 5.7 primarily based totally of 392 strokes. Afterward, you’ll be capable of getting 500 wheel torque and HP which are all aspirated. But this became relying on engine electricity and structural integrity.

If you had introduced induction on the pinnacle forcefully, you would get toward 650-700HP. But the engine would not last longer than before.


I believe you have already gained sufficient insight into what’s are the best oils for Hemi 5.7 engine. There is a noticeable difference between each of these oils in terms of the quality of the experience they can offer. Enjoy the performance to its fullest by getting the best of the best.

Similar Posts